Made in the USA W.L. Fuller
- Made of carbon steel & heat-treated for long tool life
- For use in all woods, plastics, & non-ferrous metals
- 1/4" shank to fit chuck & help reduce breakage of small diameter drills
- 82 cutting angle head
- Four flutes for clean & accurate boring
- Two hex-socket set screws in countersink
A high quality American-made countersink made by WL Fuller. Made of carbon steel & heat-treated, this countersink is very well-built, durable, & cuts into materials well. This type J countersink is designed for use in all woods, plastics, & non-ferrous metals. It has four flutes for clean & accurate boring, & a standard 82 cutting angle which will accommodate most bevelled screws. The countersink is held in place with two hex-socket set screws fastened into the bit & is easily adjustable up & down the length of the drill bit if the need arises. This countersink can be mounted on taper point, brad point & regular point drills. Made in the USA.
The W.L. Fuller Co. is a family owned, third generation manufacturer of the best countersinks, counterbores, plug cutters, taper point drills, brad point drills, & step drills. All made 100% in the U.S.A. today. With over 60 years experience manufacturing tools to cut woods, plastics, & metals, Fuller provides tools you need to get the job done while saving you time & money. All of their products carry their satisfaction guarantee.
Model Cutting Diameter Drill Hole Size Overall Length Shank Diameter Shank Length #J56 3/8" 3/32" 1-1/2" 1/4" 3/4" #J4 3/8" 7/64" 1-1/2" 1/4" 3/4" #J5 3/8" 1/8" 1-1/2" 1/4" 3/4" #J6 3/8" 9/64" 1-1/2" 1/4" 3/4" #J7 3/8" 5/32" 1-1/2" 1/4" 3/4" #J8 3/8" 11/64" 1-1/2" 1/4" 3/4" #J9 3/8" 3/16" 1-1/2" 1/4" 3/4" #J25 1/2" 1/8" 1-1/2" 1/4" 3/4" #J26 1/2" 9/64" 1-1/2" 1/4" 3/4" #J27 1/2" 5/32" 1-1/2" 1/4" 3/4" #J28 1/2" 11/64" 1-1/2" 1/4" 3/4" #J29 1/2" 3/16" 1-1/2" 1/4" 3/4" #J35 5/8" 1/8" 1-3/4" 1/4" 3/4" #J37 5/8" 5/32" 1-3/4" 1/4" 3/4" #J39 5/8" 3/16" 1-3/4" 1/4" 3/4"
